Need help?Do you have a question about the Biotage ELSD-A120 and is the answer not in the manual?
Information regarding the material content and disclaimed warranties.
Details about hardware and software usage under license terms.
Explains usage rights for software when used by the US Government.
Defines CAUTION and WARNING notices for hazards.
Details the components and function of the ELSD-A120 detector.
Explains Nebulization, Evaporation, and Detection processes in the ELSD.
Discusses how ELSD-A120 handles different compounds and solvents.
Illustrates and labels the front and rear views of the ELSD-A120.
Emphasizes the importance of a suitable environment for optimal detector performance.
Warns about electrical shock hazards and inaccessible power plugs.
Presents a table of physical specifications including weight, dimensions, voltage, etc.
Details specifications like light source, detector type, gas flow range, noise, and drift.
Guides on unpacking, inspecting for damage, and verifying delivered parts.
Instructions for connecting gas, power, and signal cables.
Procedures for setting operational parameters and verifying baseline noise.
Explains how to control the detector using the front keypad, screen, and menus.
Details key operational settings like temperature, gas flow, and gain.
Step-by-step instructions for filling the nebulizer with solvent.
Lists compatible and incompatible solvents and mobile phase additives.
Lists critical points for optimal ELS detection and avoiding performance issues.
Details placement considerations for the detector and exhaust tubing.
Discusses incompatible high boiling point solvents and storage recommendations.
Covers common issues like baseline noise, spikes, low sensitivity, and peak tailing.
Addresses no power, no response, and detector fails to zero scenarios.
Troubleshoots temperature errors, display issues, and vapor sensor errors.
Explains the meaning and impact of error messages on operation.
Covers errors related to temperature limits and sensor failures.
Addresses errors related to fans, vapor detection, leaks, and gas flow.
States maintenance is for authorized personnel and lists safety warnings.
Details cleaning for the detector exterior, nebulizer, and evaporator tube.
Procedures for drying the diffuser and inspecting cables.
Instructions for storing the detector and replacing firmware.
Lists part numbers and descriptions for spare parts.
Covers general safety precautions, symbols, and safety standards.
Explains WEEE Directive compliance and radio interference guidelines.
Directs users to the Biotage website for additional information.
General| Brand | Biotage |
|---|---|
| Model | ELSD-A120 |
| Category | Laboratory Equipment |
| Language | English |
To Next Page
