Biotage ELSD-A120 - Invalid Evaporator Temperature; Invalid Nebulizer Temperature; Leak Sensor Failed

Biotage
®
ELSD-A120 User Manual 59
Error Information
7
Error Messages
Invalid Nebulizer Temperature
Error ID: 22
Invalid nebulizer temperature reading.
Invalid Evaporator Temperature
Error ID: 23
Invalid evaporator temperature reading.
Leak Sensor Failed
Error ID: 30
The leak sensor in the detector has failed.
Probable cause Suggested actions
1 Nebulizer heater not connected to
the main board
Please contact your Biotage service
representative
2 Defective nebulizer heater Please contact your Biotage service
representative
Probable cause Suggested actions
1 Evaporator heater not connected to
the main board
Please contact your Biotage service
representative
2 Defective evaporator heater Please contact your Biotage service
representative
Probable cause Suggested actions
1 Leak sensor not connected to the
main board
Please contact your Biotage service
representative
2 Defective leak sensor Please contact your Biotage service
representative
3 Defective main board Please contact your Biotage service
representative