Tally light behaviour
Tally is used in productions for both talent and camera operators
to be aware which camera is being transmitted live to air (Program)
or being previewed with the intention of going live to air next
(Preview). BirdDog receives these signals from devices that
support Tally such as vision switchers and displays this information
on the internal screen.
If no destination device is receiving the NDI signal being genera-
ted by Mini in either PROGRAM or PREVIEW mode, Mini's Tally
light will not illuminate.
1
If a destination device is receiving the NDI signal being generated
by Mini on the PREVIEW bus, the tally light will illuminate GREEN.
2
If a destination device is receiving the NDI signal being generated
by Mini on the PROGRAM bus, the tally light will illuminate RED.
3
To Next Page
Loading...
