Need help?Do you have a question about the birddog MINI and is the answer not in the manual?
Identifies and describes the external connectors and features of the BirdDog Mini unit.
Instructions for powering the BirdDog Mini using a single Ethernet cable via PoE, requiring a certified 802.11af/at switch.
Guidance on powering the BirdDog Mini using a DC cable, specifying the voltage range of 5-18v.
Details how the BirdDog Mini becomes visible as a source on the network and the requirement for console access.
Provides the URL format and default password for accessing the BirdDog Mini's web configuration console.
Instructions on selecting AUTO or MANUAL as the primary source setting for video input.
Guidance on locating and selecting BirdDog sources on NDI Studio Monitor and NewTek TriCaster devices.
Instructions on how to activate the network configuration reset function using the reset switch.
General| Ethernet | 1 x Gigabit Ethernet |
|---|---|
| NDI Support | Yes |
| Tally | Yes |
| Input Ports | 1 x HDMI |
| Output Ports | 1 x HDMI, 1 x SDI |
| Video Formats | 1080p |
| Audio Input | Embedded in HDMI |
| Audio Output | Embedded in HDMI |
| Power | 5V DC |
| Audio Support | Embedded audio in SDI and HDMI signals |
To Next Page
