Need help?Do you have a question about the BIRO AFMG-48-II and is the answer not in the manual?
Procedures for unboxing, assembling, and preparing the machine for use.
Detailed specifications for mixer and grinder motors, including voltage and overload settings.
Step-by-step instructions for grinding and mixing food products.
Procedures for cleaning the main body of the mixer grinder.
Specific care instructions for tin-coated bowl components.
Instructions for correctly installing the grinding bowl assembly.
Steps for fitting and securing the mixing paddle.
Guidance on lubricating motors and bearing housings.
Maintenance advice for the motor component of the reducer.
Maintenance and lubricant specifications for the gear reducer.
Procedure for draining and refilling the Dorris mixer transmission oil.
Steps to adjust the tension of the mixer drive belt.
Guidance on lubricating the main drive chain and sprockets.
Instructions for replacing the main drive chain.
Details for safety covers on earlier models (S/N up to 63400).
Information on lid lock features for specific serial number ranges.
Components for the standard Enterprise plated bowl.
Components for the optional stainless steel Enterprise bowl.
Components for the optional stainless steel Unger bowl assembly.
Details and parts for the journal box assembly.
Wiring diagram for the footswitch operation.
List of parts for the footswitch assembly.
Connection requirements for BIRO manuals.
Connection requirements between specific BIRO models.
Connection requirements for identical BIRO models.
Components for the 48 size discharge horn assembly.
Components for the 52 size discharge horn assembly.
To Next Page
General
