Need help?Do you have a question about the BIRO EMG-32 and is the answer not in the manual?
Stresses the importance of trained operators and supervision for safe use.
Essential rules to prevent serious injury, including machine operation and electrical safety.
Step-by-step process for unboxing, assembling, and positioning the unit.
Instructions for proper electrical hookup, voltage, and wire sizing.
Technical data for grinder and mixer motors.
Key safety rules and best practices for operating the machine.
Guidelines for sanitary food handling to prevent contamination.
Step-by-step instructions for processing food products.
Instructions for installing the grinding bowl, auger, knife, and plate.
Details on lubricating motors, chains, and bearings.
Lubricant types and change intervals for gear reducers.
How to adjust tension for mixer and main drive chains.
Procedure for setting correct belt tension using a tension tester.
Step-by-step guide for retrofitting a new gear reducer.
Guidelines for oil changes, compatible oils, and seal maintenance.
Steps for cleaning the main unit and its components.
Proper methods for cleaning the safety cover.
How to install mixing paddles correctly based on timing.
Steps for detaching mixing paddles from the drive shafts.
Diagram illustrating the wiring connections for the foot switch.
List of all components making up the electric foot switch.
Details and parts list for the pneumatic foot switch.
List of miscellaneous parts not visually detailed in other sections.
Comprehensive list of all fasteners used, with sizes and materials.
List of parts associated with the belt drive option.
To Next Page
General
