BIRO EMG-32 - Safety Tips for Operation; Critical Safety Precautions

SAFETY TIPS
ROTATING GRINDING AUGER &
ROTATING MIXING PADDLES
TO AVOID SERIOUS PERSONAL INJURY
• NEVER Touch This Machine without Training and Authorization by Your Supervisor.
2
• NEVER Place Hands into Machine Input or Output Openings.
• NEVER Open Machine During Operation.
• ONLY Use a Qualied Electrician to Install According to Local Building Codes: Machine MUST Be
Properly Grounded.
• ALWAYS Connect to Proper Voltage & Phase.
• ONLY Install on Level, Non-Skid Surface in a Clean, Well-Lighted Work Area Away from
Children and Visitors.
• ALWAYS Lock Machine Castors After Moving This Machine.
• NEVER Use This Machine For Non Food Products.
• NEVER Operate Machine With Product Mixer Safety Cover Open or Removed or Magnetic
Interlock Switch By-Passed.
• ALWAYS Turn Off, Unplug Machine From Power Source and Perform Lockout/Tagout
Procedure to this Machine BEFORE Attempting to Unjam or Unclog, Cleaning or Servicing.
• NEVER Leave Machine Unattended While Operating.
• NEVER Alter This Machine From its Original Form as Shipped From Factory. DO NOT
Operate Machine With Missing Parts.
• PROMPTLY REPLACE Any Worn or Illegible Warning Labels.
• ALWAYS Read Operation and Service Manual BEFORE Operating, Cleaning, or Servicing.
• USE ONLY BIRO Parts and Accessories Properly Installed.