BIRO AFMG-52 User Manual

Item No. 57037
Form No. AFMG52-232-6-17-18 B
Model AFMG-52 AUTOMATIC FEED MIXER GRINDER
OPERATING AND SERVICE MANUAL
STARTING WITH SERIAL NO. 52001
STARTING WITH SERIAL NO. 52101
(SIDE OPENING LID)
STARTING WITH SERIAL NO. 52345
(35 ° INLET/TRI DIRECTIONAL LID)
IMPORTANT NOTICE
This Manual contains important
safety instructions which must
be strictly followed when using
this equipment.

BIRO AFMG-52 Specifications

General

Brand	BIRO
Model	AFMG-52
Category	Grinder
Language	English

Summary

Notice to Owners and Operators

Safety Symbols and Warnings

Explains the meaning of warning and caution symbols used in the manual.

Safety Tips

Personal Injury Prevention

Precautions to avoid serious personal injury from rotating parts.

Installation

Installation Safety Precautions

Guidelines for safe installation in a proper work area.

Uncrating and Setup Procedure

Steps for unpacking and preparing the machine for operation.

Motor Wiring and Electrical Requirements

3-Phase Motor Specifications

Technical specifications for mixer and grinder motors, including voltage and amps.

Electrical Connection Note

Operation

Operation Safety Precautions

Product Processing Steps

Detailed steps for processing product through the mixer grinder.

Cleaning

Cleaning Safety Precautions

Mixer-Grinder Cleaning Procedure

Step-by-step instructions for cleaning the mixer grinder unit.

Tin Coated Parts Cleaning

Maintenance

Maintenance Safety Precautions

Grinding Bowl Installation

Mixing Paddle Installation

Lubrication Guide

Recommendations for lubricating motors and bearing housings.

Nord Helical-Worm Gear and Motor Reducer

Electrical Connections for Gear Reducer

Gear Reducer Maintenance and Lubrication

Maintenance procedures and lubricant specifications for the gear reducer.

Drive Chain Maintenance

Main Drive Chain Lubrication

Main Drive Chain Tension Adjustment

Chain Replacement Procedure

Mixer Drive Shaft Seal Replacement

Seal Replacement Assembly Instructions

Optional Eagle Belt Drive System

Belt Tensioning Instructions

Step-by-step guide to correctly tension the Eagle drive belt.

Electrical Supply Cord Replacement

Mixer Grinder Parts List

Tandem Operation Parts (Up to S/N 52344)

Tandem Operation Illustration (90° Inlet)

Tandem Operation Parts (From S/N 52345)

Tandem Operation Connection Instructions

Tandem Operation Illustration (35° Inlet)

Wiring Diagram

Safety Label Locations