Bison 6620 - Page 10

10
Fig. 7 shows correct location of the vise on machine-tool table. Only unloaded
part of the vise base may project outside the table (the one beyond the holder).
Cases shown in Fig. 8 are forbidden.
Fig. 7. Correct location of vise on machine-tool table
Table 4. Machine-tool table dimensions
Type
Machine-tool table dimensions
a
t
M
100
12
50; 100
M10x35-10.9
125
12
32; 63
M10x35-10.9
150
18
50; 100
M16x45-10.9
200
18
63; 125
M16x45-10.9