With
DC
Circuit Protector With
DC
Fuse
DC
FU
SE
P
OS
ITI
VE TERM
IN
AL(
RED
)
DC
circuit
protector(or
DC
Fuse)
The
DC
circuit protector(or
DC
Fuse) automatically shuts off the
DC
battery.
charging
ci
「
cuit
when the
DC
circuit
is
overloaded, when there
is
a problem with the
battery, or the connections between the battery and the generator are improper.
the indicator inside the
DC
circuit protector button will pop out to show that the
DC
circuit: protector has switched off. Wait a few minutes and push the button
in
lo reset
the
DC
circuit protector.
Connecting
the batter/ cables:
心
．
Before
connecting charging cables to a battery that
is
installed
in
a vehicle
Disconnect the vehicle's grounded battery cable.
,
:n
勹
C:a;
：：盓
e2IVae
；芯尸$＄
~~~e
agd~:
＄」
atkeee$n
哥
iaat}
心:
:\$
nes
charging causing batteries.
®· Connect the positive(+) battery cable to the battery positive(+) terminal.
®· Connect the other end
of
the positive(+) battery cable to the generator
@. Connect the negative(-) battery cable to the battery negative(-) terminal.
@. Connect the other end of the negative(-) battery cable to the generator
®· Start the generator.
10
To Next Page
Loading...
