OPERATION TIPS
NOTICE
__Look Down and backwards ensuring that the
area is clear before reversing.
__Do not operate on steep slopes.
__Do not operate while the stand is in the working
position.
__Do not stop, start or suddenly changing direction
on slopes.
__Be Careful and reduce speed on slopes and
difficult terrain.
__Be aware of the dangers hidden in the ground
during the operation.
__Before operating read the instruction manual,
secure lock, and check stability.
Secure locking prevents the equipment to fall
because of a hydraulic leak, hydraulic system
failure, or failure of a mechanical component.
FILLING
For filling trenches or ditches, reverse bulldozer
turning counterclockwise and push back.
LEVELING
Place the rear blade to the desired position for
offset, angle and tilt for leveling and terracing.
PREVIOUS OPERATION CHECKLIST
(OPERATOR RESPONSIBILITY)
__Check and follow all safety rules and safety
decals on page 17.
__Check that the equipment is correctly and firmly
attached to the tractor.
__Check that all safety decals are installed and in
good condition. Replace if they are damaged.
__Check that all screws and bolts are tight and
properly installed.
CAUTION
__Stop the tractor and equipment immediatly after
hitting an obstacle. Turn off the engine, remove the
key, inspect, and repair any damage before resume
operation.
__Check that all lubrication points are properly
greased.
__Make sure the blade of the rear blade is in good
condition.
__Check that all connectors and hydraulic hoses
are in good condition and not leaking, before
starting the tractor. Make sure the hoses are not
twisted, bent, frayed or stretched. Replace
damaged hoses immediately.
25
OPERATION
To Next Page
Loading...