How to fix a Bissell 1547 Vacuum Cleaner that won’t turn on?
If your Bissell Vacuum Cleaner won’t turn on, start by checking the electrical plug to ensure it's properly connected. Also, inspect the fuse or breaker; replace the fuse or reset the breaker if necessary.
Why is my Bissell 1547 Vacuum Cleaner not picking up dirt?
If your Bissell Vacuum Cleaner isn’t picking up dirt, first, adjust the powerfoot to the correct height setting. Make sure the hose is firmly attached to the suction opening. Check the hose for cracks or holes and replace it if needed. Empty the dirt tank if it's full and ensure it, as well as the upper tank, are correctly positioned and locked in place. Lastly, check and clean or replace the pre-motor and post-motor filters.
Why is dirt escaping from my Bissell Vacuum Cleaner?
If you notice visible dirt escaping from your Bissell Vacuum Cleaner, the dirt tank may be full, so empty it. Also, check the pre-motor and post-motor filters to ensure they are installed correctly.
How to restore suction power in my Bissell 1547?
To restore suction power to your Bissell Vacuum Cleaner, start by emptying the dust bin. Then, check, clean, or replace the filters. If the issue persists, follow instructions E3 on page 6 for cleaning the hard floor tool.
What to do if the power cord will not rewind on my Bissell 1547 Vacuum Cleaner?
If the power cord on your Bissell Vacuum Cleaner won’t rewind, pull out a large section of the cord and rewind it.
Why won’t the power cord pull out of my Bissell 1547 Vacuum Cleaner?
If the power cord on your Bissell Vacuum Cleaner won’t pull out, press the rewind button and pull it out.
General| Brand | Bissell |
|---|---|
| Model | 1547 SERIES |
| Category | Vacuum Cleaner |
| Language | English |
General safety warnings to mitigate fire, electric shock, and injury risks during vacuum cleaner operation.
Instruction for users to retain the manual for future reference and continued safe operation.
Information regarding the polarized plug and its correct usage to prevent electric shock.
Crucial safety warnings related to product operation, including suffocation hazards and electrical precautions.
Step-by-step guide for connecting the hose, extension wand, and floor nozzle for vacuum assembly.
Instructions on how to use the automatic cord rewind feature for convenient storage and tidiness.
Guidance on how to turn the vacuum cleaner ON or OFF using the power button.
Details on using the floor nozzle for carpets, rugs, and bare floors, including brush height adjustment.
Guidance on using crevice tools, dusting brushes, and upholstery tools for various cleaning tasks.
Instructions for using the Turbine Hard Floor Tool on hard surfaces like tile, wood, and laminate.
Explanation of how to adjust the air flow regulator to control suction power for different surfaces.
Step-by-step instructions on how to safely and effectively empty the dirt cup after use.
Procedure for cleaning the dirt cup filter, including washing and drying instructions.
Steps for removing and replacing the post-motor filter to maintain air quality.
Instructions for cleaning the cyclone shroud component of the vacuum cleaner.
Guide to identifying and clearing clogs within the dirt cup and related components.
Steps for removing debris from the turbine hard floor tool, including brush access.
Solutions for common issues when the vacuum cleaner fails to power on.
Troubleshooting steps for when the vacuum cleaner is not effectively picking up dirt or debris.
Advice for diagnosing and resolving issues related to reduced suction power in the vacuum cleaner.
Solutions for problems related to the power cord not rewinding or pulling out correctly.
A comprehensive list of available replacement parts for the BISSELL vacuum cleaner with part numbers.
Information on the terms, coverage, and limitations of the two-year limited warranty.
Guidance on how to obtain service, repair, or replacement parts for the BISSELL product.
Contact information for BISSELL Consumer Care for support, warranty questions, and service.
To Next Page