Bissell 2002 series User Manual (English)

Questions and Answers:

J
james79Aug 9, 2025
Why is my Bissell 2002 Vacuum Cleaner not spraying?
- G
  graybrandyAug 9, 2025
  If your Bissell Vacuum Cleaner has reduced spray or no spray, there are several potential causes. First, check if the solution/clean tank is empty and refill it if necessary. If the tank isn't empty, the pump might not be primed; try turning on the unit, pressing the spray trigger, and gently rocking the Pet Stain Eraser back and forth. Weak or undercharged batteries can also cause this issue, so recharge them as instructed. Additionally, the spray tip could be clogged, so rinse it with clean water. Finally, ensure the clean tank is fully inserted by removing and then replacing it securely.
E
Elizabeth MartinezAug 14, 2025
Why does my Bissell 2002 have no suction?
- T
  Tony JonesAug 14, 2025
  If your Bissell Vacuum Cleaner has reduced or no suction, start by emptying the dirty water tank, as it may be full. Check the dirty water tank drain plug to ensure it is snugly fit. Weak or undercharged batteries can also cause suction issues, so recharge them according to the instructions. Finally, make sure the dirty water tank is properly installed by snapping it into place.
M
Michelle LuceroAug 20, 2025
What to do if my Bissell 2002 Vacuum Cleaner will not charge?
- M
  Margaret WeaverAug 20, 2025
  If your Bissell Vacuum Cleaner won't charge, ensure the charger plug is completely plugged into the wall outlet and the charging cord is completely plugged into the port on the back of the unit. Also, make sure you are using the charger that came with the machine.
K
Kenneth PowellAug 27, 2025
Why is my Bissell Vacuum Cleaner leaking?
- A
  Ashley GrayAug 27, 2025
  If your Bissell Vacuum Cleaner is leaking, several factors could be the cause. Ensure the formula tank is fully seated. Also, ensure the dirty tank plug is sealed properly. Empty the dirty tank if it is full, and remember the unit should not be left on its side with water in the dirty tank. Finally, ensure the unit is upright.
R
Rachel RobinsonSep 2, 2025
How to fix suction issues with the window tool on my Bissell 2002?
- K
  Kelly MartinezSep 2, 2025
  If you're experiencing reduced or no suction on the window tool of your Bissell Vacuum Cleaner (select models), first, remove and reinstall the nozzle to ensure it's properly installed. Next, make sure the squeegee is against the window for optimal suction. Finally, remove and reinstall the window tool itself to ensure it's correctly attached.