Bissell 2003 series User Manual (English)

Questions and Answers:

M
Molly BaldwinAug 2, 2025
Why is my Bissell 2003 Vacuum Cleaner not spraying?
- R
  Ryan PerezAug 3, 2025
  If your Bissell Vacuum Cleaner has reduced spray or no spray, there are several potential causes. First, check if the solution/clean tank is empty and refill it if necessary. If the tank isn't empty, the pump might not be primed; try turning on the unit, pressing the spray trigger, and gently rocking the Pet Stain Eraser back and forth. Weak or undercharged batteries can also cause this issue, so recharge them as instructed. Additionally, the spray tip could be clogged, so rinse it with clean water. Finally, ensure the clean tank is fully inserted by removing and then replacing it securely.
A
Ashley PhillipsAug 8, 2025
Why does my Bissell 2003 Vacuum Cleaner have no suction?
- M
  mmontesAug 8, 2025
  If your Bissell Vacuum Cleaner has reduced or no suction, start by emptying the dirty water tank, as it may be full. Check the dirty water tank drain plug to ensure it is snugly fit. Weak or undercharged batteries can also cause suction issues, so recharge them according to the instructions. Finally, make sure the dirty water tank is properly installed by snapping it into place.
J
Joyce SmithAug 14, 2025
What to do if my Bissell Vacuum Cleaner will not charge?
- J
  john39Aug 14, 2025
  If your Bissell Vacuum Cleaner won't charge, ensure the charger plug is completely plugged into the wall outlet and the charging cord is completely plugged into the port on the back of the unit. Also, make sure you are using the charger that came with the machine.
D
Douglas RobinsonAug 21, 2025
Why is my Bissell 2003 leaking?
- K
  Kevin LeeAug 21, 2025
  If your Bissell Vacuum Cleaner is leaking, several factors could be the cause. Ensure the formula tank is fully seated. Also, ensure the dirty tank plug is sealed properly. Empty the dirty tank if it is full, and remember the unit should not be left on its side with water in the dirty tank. Finally, ensure the unit is upright.
S
Seth WoodsAug 27, 2025
How to fix suction issues with the window tool on my Bissell 2003 Vacuum Cleaner?
- M
  Matthew MillerAug 27, 2025
  If you're experiencing reduced or no suction on the window tool of your Bissell Vacuum Cleaner (select models), first, remove and reinstall the nozzle to ensure it's properly installed. Next, make sure the squeegee is against the window for optimal suction. Finally, remove and reinstall the window tool itself to ensure it's correctly attached.