www.BISSELL.com
5
1
Place the Handle onto the
base and push it down.
Then attach the handle
with the 2 screws taped to
the handle in a plastic bag.
Assembly
The only tool you will need to assemble your vacuum is a
Phillips-head screwdriver.
Insert the Extension Wand Base and
turn it to the right to lock in place.
2
3
4
5
Insert the Stretch Hose end into the
back of the vacuum and twist right to
lock in place.
NOTE: The Powerfoot will not suction properly unless the Stretch Hose is firmly attached.
Wrap Stretch Hose
up and around the
hose wrap on the
handle. Slide end of
hose into vacuum
base.
TurboEraser® ToolDusting Brush
Extension Wand
(Crevice Tool stores inside)
Now, put your accessory tools on the vacuum and you’re ready to go!
Pet Hair Corner Tool
To Next Page
Loading...
