www.bissell.com 800.237.7691
Maintenance and care
www.bissell.com 800.237.7691
12
TurboBrush Tool maintenance
Select models include Pet TurboEraser
Tool that follows same maintenance
instructions.
1. Turn power OFF. Unplug vacuum cord
from electrical outlet.
2. Turn tool so bottom side faces up and
remove the two screws.
3. Remove the faceplate and clear any
obstructions
4. Remove the brush from the drive belt to
clean debris.
5. Reposition the drive belt on the brush,
and place ends of brush in slots on the
side. Reposition faceplate and secure
with two screws.
2.
4.
To Next Page
Loading...
