Bissell REVOLUTION HYDROSTEAM 3423 Series User Manual

Meet your new BISSELL product!
Go to support.BISSELL.com for a comprehensive walkthrough
of your new purchase, including videos, tips, support, and more.
Want to get started right away? This guide has all the information
you need to set up your new product. Let’s take a look…
What’s in the Box? ............................................ 3
Assembly .............................................................. 3
Controls and Cleaning Modes ...................... 3
Filling the Clean Water Tank.........................4
Three Modes of Cleaning ............................... 5
Cleaning with the Hose and Tool ................ 7
After-Cleaning Care ......................................... 8
Replacing the Belts and Brush Rolls .........11
Troubleshooting ................................................. 11
Warranty ...............................................................11
REVOLUTION® HYDROSTEAM™
UPRIGHT CARPET CLEANER WITH STEAM
3423 SERIES
Product Overview
1. Handle with Fingertip
Controls
2. Clean Water Tank
Carry Handle
3. Clean Water Tank
4. Dirty Water Tank
Carry Handle
5. Machine Carry Handle
6. Dirty Water Tank
7. Mode Indicator Lights
8. Accessory Hose Door
9. HydroSteam Bar
10. EdgeSweep® Brushes
11. Formula & Steam
Spray Trigger
12. Quick Release™
Cord Wrap
13. Recline Pedal
6
8
7
9
10
12
13
2
4
5
3
1
11

Bissell REVOLUTION HYDROSTEAM 3423 Series Specifications

General

Cord Length	25 feet
Power Source	Corded Electric
Product Type	Upright Carpet Cleaner
Model Number	3423
Voltage	120 V
Power	6.8 amps
Surface Recommendation	Carpet
Warranty	3-Year Limited Warranty

Summary

Product Overview

Important Safety Instructions

Grounding Instructions

Connect appliance only to a properly installed and grounded outlet for electrical safety.

Important Information

General precautions regarding storage, brush roll operation, and avoiding damage.

What's in the Box?

Controls and Cleaning Modes

Fingertip Controls

Details on power and mode selection buttons located on the handle.

Foot Display & Cleaning Modes

Explanation of the foot display indicators for Steam Pretreat, SteamWash Max, and Quick Dry modes.

Filling the Clean Water Tank

Three Modes of Cleaning

Startup

Initial setup steps including plugging in and turning on the appliance.

Pretreat with Steam

Procedure for using steam to loosen tough stains before main cleaning.

SteamWash™ Max Clean Mode

Instructions for cleaning carpets using water, formula, and steam.

Quick Dry

Method for a quick clean using water and formula, with faster drying times.

Cleaning with the Hose and Tool

Attaching the Hose

Steps to connect the hose and accessory tools to the machine.

2-in-1 Upholstery Tool

Details on using the upholstery tool for both dry vacuuming and wet cleaning.

Cleaning the 2-in-1 Upholstery Tool

Instructions for emptying and rinsing the upholstery tool's dirt cup.

3" and 6" Tool

Guidance for using the smaller tools for spot cleaning and scrubbing stains.

After-Cleaning Care

Emptying the Dirty Water Tank

Procedure for safely removing and emptying the dirty water tank.

Cleaning the Machine

Steps to clean the machine's nozzle, brush roll chamber, and steam bar.

Using the Rinse and Storage Tray (select models)

Instructions for using the tray to rinse brush rolls and store the machine.

Storing Your Machine

Guidance on preparing and storing the carpet cleaner after use.

Replacing the Belts and Brush Rolls

Troubleshooting

Information on resolving common issues with the appliance.

Warranty

Details on the limited warranty and how to obtain service.