EasyManua.ls Logo

Bissell SMARTCLEAN 2268 - User Manual

Bissell SMARTCLEAN 2268
12 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
SMARTCLEAN
®
USER GUIDE
2268
More of a video
person? Find
instructional videos
for all sections with
this icon at
www.BISSELL.com/
videos

Table of Contents

Questions and Answers

  • A
    Angela KingJul 28, 2025
    Why is my Bissell SMARTCLEAN 2268 Vacuum Cleaner not picking up dirt?
    • D
      Dr. Brandon Mcgee MDJul 28, 2025
      If your Bissell Vacuum Cleaner isn't picking up dirt, several factors could be at play. Start by checking if the Dirt Tank is properly seated; press the Tank Release Button to release it and then align it correctly. Also, ensure the hose is correctly connected by pushing the hose connector into the port on the canister until it clicks. If the hose is connected, inspect it for cracks or holes. If you find any damage, you'll need to order a new hose from BISSELL.com. Dirty filters or a dirty Multi-Cyclonic system can also cause this issue. Remove and wash the filters, letting them dry for a full 24 hours before reinstalling, or remove the separator from the Dirt Tank and rinse it clean, ensuring it also dries for 24 hours before reassembly. Finally, there may be a clog in the vacuum.
  • K
    kathrynschmittAug 4, 2025
    How to fix a Bissell SMARTCLEAN 2268 that is hard to push?
    • J
      Julie CastilloAug 4, 2025
      If your Bissell Vacuum Cleaner is hard to push or pull, the suction might be set too high. Try using the Variable Suction Controls on the canister to adjust it.
  • J
    Jeffrey HarperAug 12, 2025
    What to do if dirt is escaping from my Bissell SMARTCLEAN 2268 Vacuum Cleaner?
    • M
      moorefranciscoAug 12, 2025
      If dirt is escaping from your Bissell Vacuum Cleaner, the Dirt Tank might be full; empty it. Also, check the filters in the tank and under the filter door at the back of the canister to ensure they are installed and clean.
  • D
    Dr. Robert Morris DDSAug 20, 2025
    Why does my Bissell SMARTCLEAN 2268 Vacuum Cleaner make a high-pitched noise?
    • J
      Jessica MasseyAug 20, 2025
      A high-pitched noise or whistling sound in your Bissell Vacuum Cleaner can indicate a clog. You should power OFF and unplug the vacuum. Disconnect the hose from the canister to check for clogs or debris. It may also indicate a clog in the pleated filter. Remove the pleated filter from the back of the vacuum and rinse it clean, then let it dry for 24 hours before reinstalling.

Summary

Important Safety Instructions

Polarized Plug Information

Details about the appliance's polarized plug and its proper use to reduce electric shock risk.

Whats in the Box?

Product View

Assembly

Using Your SmartClean Vacuum

Emptying the Dirt Tank

Cleaning the Filters

Cleaning the Cyclonic System

Clearing a Clog

Storing the Vacuum

Troubleshooting

Warranty

Service

Register Your Product

Bissell SMARTCLEAN 2268 Specifications

General IconGeneral
Product TypeBagless Vacuum
Cord Length6.5 meters
Filter TypeHEPA Filter
Special FeaturesLED Headlight
Power SourceCorded Electric
RuntimeNot Applicable
Charging TimeNot Applicable

Related product manuals