Need help?Do you have a question about the Bitfury B8 and is the answer not in the manual?
General| Brand | Bitfury |
|---|---|
| Model | B8 |
| Category | Computer Hardware |
| Language | English |
Instructions for preparing an SD card for the Open Miner using the Windows operating system and Win32DiskImager utility.
Links and instructions for preparing an SD card using macOS for the Open Miner.
Links and instructions for preparing an SD card using Linux for the Open Miner.
Instructions to set the special PROG jumper for automatic internal firmware updates on the Open Miner.
Connect the Open Miner via Ethernet, power it on, and access its web interface using the provided IP address and credentials.
Connect via SSH using a Linux terminal with provided login and IP address.
Use PuTTY SSH client to connect to Open Miner from Windows system.
Utilize the omtest utility via SSH to perform hardware diagnostics on the Open Miner.
Configure mining pool settings by entering server host, port, worker, and password via the web interface.
Enable remote access for Bitfury technical support by setting up an identity via the Service menu.
Disable remote assistance feature permanently by executing specific SSH commands to remove VPN configuration.
Change default web interface and SSH passwords for security using web interface or passwd command.
To Next Page