BITMAIN AntMiner D3

- 11 -
AntMinerD3InstallationGuide
4. Configuring the Miner
4. Configuring the Miner
4.1 Setting Up the Pool
To configure the miner:
1. In Miner Configuration, click General Settings.
2. Set the options according to the following table:
Option
Description
Pool URL
Enter the URL of your desired pool.
The AntMiner D3 can be set up with three mining pools, with decreasing
priority from the first pool (pool 1) to the third pool (pool 3).
The pools with low priority will only be used if all higher priority pools are
offline.
Worker
Your worker ID on the selected pool.
Password
The password for your selected worker.
3. Click Save & Apply.