EasyManuals Logo

BIXOLON SPP-R200III Bluetooth Connection Manual

BIXOLON SPP-R200III
8 pages
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #8 background imageLoading...
Page #8 background image
Rev. 1.00
- 8 -
SPP-R200III
5. Troubleshooting
5-1 Please follow the guide below if Bluetooth is not searched on iOS device.
1) Perform self test to check the printer is set as iOS mode.
2) Check whether printer is connected to other iOS device. Printer is not able to be
found on your iOS device if it is connected to other iOS device. If STATUS LED
blinks when you press Feed button, it means that printer is connected to other iOS
device.
You need to disconnect the connection to other iOS device, or turn on the printer
again while the paper cover is opened.
* Printer is automatically connected to last iOS device which was connected in iOS
mode. But it does not make a connection to any device, if user turns it on while the
paper cover of it is opened.
5-2 Refer to this, if you see the pop-up message as below.
1) Failed to connect to SPP-R200III”.
2) The Failed to connect message might appear on a screen, since NFC Auto pairing
merely supports Bluetooth paring and does not allow device to device
communication. However, it operates properly.

Other manuals for BIXOLON SPP-R200III

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the BIXOLON SPP-R200III and is the answer not in the manual?

BIXOLON SPP-R200III Specifications

General IconGeneral
Ethernet LANNo
BluetoothYes
Bluetooth version3.0+HS
Serial ports quantity1
USB 2.0 ports quantityUSB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Connectivity technologyWired
TypeMobile printer
Print technologyDirect thermal
Maximum resolution203 x 203 DPI
Product colorBlack
Flash memory32 MB
RAM capacity0.064 GB
Built-in barcodes1D, 2D, AZTECCODE, CODABAR (NW-7), Code 39, Code 93, Code-128 Codabar Library, Data Matrix, EAN13, EAN8, GS1 DataBar, ITF, MaxiCode, Micro QR Code, PDF417, QR Code, UPC-A, UPC-E
Media thickness0.07 ± 0.005 mm
Maximum roll diameter40 mm
Maximum printing width48 mm
International Protection (IP) codeIP43
Battery voltage7.4 V
Battery recharge time2.5 h
Storage temperature (T-T)30 - 70 °C
Operating temperature (T-T)-15 - 50 °C
Operating relative humidity (H-H)10 - 80 %
Mobile operating systems supportedAndroid, iOS
Weight and Dimensions IconWeight and Dimensions
Depth43.6 mm
Width79.5 mm
Height126.7 mm
Weight228 g

Related product manuals