BIXOLON SPP-R300 - Battery Safety - Danger; Battery Handling Dangers

POS/Mobile Printer
Rev. 1.00
- 6 -
2-3 State (LONG R)
This is the property that sets the printer status. It is read only and calls GetStatus() to read
the printer status. The status value can be set in duplicate and each value can be checked
using bitwise operation.
These are the printer status values:
Constant
Value
Description
STS_NORMAL
0
The printer status is normal.
STS_PAPEREMPTY
1
There is no paper.
STS_COVEROPEN
2
The paper cover is open.
STS_NEAREND
4
The paper is low (Near end).
* Example
ConnectToprinter(port)
……
SetAutoStatusCheck(true);
int status = GetStatus();
if ((status & STS_PAPEREMPTY) == STS_PAPEREMPTY)
……
if ((status & STS_COVEROPEN) == STS_COVEROPEN)
……
…….