Rev. 1.01
- 4 -
SRP-270
2-2 CITIZEN Mode
Control code Hexadecimal code Function
<FF> "n" 0C + n "n" -lines paper feed command
<LF> OA Paper feed command
<SO> 0E Enlarged character command
<SI> 0F Normal character command
<DC1> 11 Initial set command
<DC2> 12 Inverted character command
<DC3> 13 Red color print command
<CAN> 18 Clear command
<ESC> "P" <0> 1B, 50, 00 Paper partial cut command
<ESC> "P" <1> 1B, 50, 01 Paper partial cut command
<ESC> "-" "n" 1B, 2D, n Underline command
<ESC> "1" 1B, 31 1/9 inch paper feed preset command
<ESC> "2" 1B, 32 2/9 inch paper feed preset command
<ESC> "C" "n" 1B, 43, n Page length set command
<ESC> "f" "1" 1B, 66, 01 Form feed command
<SUB> 1A Second drawer drive command
<FS> 1C First drawer quick drive command
<ESC><BEL> n1 n2 1B, 07, n1, n2 Drive pulse setting command for the first
drawer
<BEL> 07 First drawer drive command
2-3 STAR Mode
Control code Hexadecimal code Function
<ESC> "C" n 1B 43 n Set page length at n lines
<ESC> "R" n 1B 52 n Select international character set.
<ESC> "M" 1B 4D
Select 9×7(Half dots) character size
<SO> 0E Select expanded character mode
<SI> 0F Select upside-down
<DC2> 12 Cancel upside-down character
<DC4> 14 Cancel expanded character mode
(Default setting)
<ESC> "W" "1"
<ESC> "W" <1>
1B 57 31
1B 57 01
Select expanded character mode
<ESC> "W" "0"
<ESC> "W" <0>
1B 57 30
1B 57 00
Cancel expanded character mode
(Default setting)
<ESC> "4" 1B 34 Red color print selection
<ESC> "5" 1B 35 Red color print deselection
<ESC> "E" 1B 45 Emphasized print mode selection
<ESC> "F" 1B 46 Emphasized print mode deselection
(Default setting)
<ESC> "a" n 1B 61 n Feed paper n lines
To Next Page
Loading...
Need help?
General
