◈ Self-Test
1. Make sure the paper roll has been installed properly.
2. Turn on the power while holding down the FEED button. The self-test begins.
3. The self-test prints the current printer status, providing the control ROM version and the
DIP switch setting.
4. After printing the current printer status, self-test printing will print the following, and
pause. (The PAPER LED light blinks.)
Self-test printing.
Please press the FEED button
5. Press the FEED button to continue printing. The printer prints a pattern using the built-in
character set.
6. The self-test automatically ends and cuts the paper after printing the following.
*** COMPLETED ***
7. After the self-test is complete, the printer returns to normal on-line status.
※ Note
The self-test lets you know if your printer is operating properly. It checks the print quality,
ROM version, and DIP switch settings.
◈ Specification
Item Details
Printer
Printing Method Serial impact dot matrix
Head Pin 9-pin serial
Printing Direction Bi-directional
Printing Speed *1) Approx. 4.6 LPS
Characters per line
Font A 33 (9*9), Font B 40 (7*9),
Korean 20 (17*9)
Receive Buffer 4k Bytes
Output Voltage DC 24 V, 1.5 A
Reliability *2)
Printer MCBF : 18,000,000 Lines
(Except print head life )
Print head life : 300,000,000 Dots
Temperature
Operating : 0℃ ~ 40℃ ( 32℉ ~ 104℉)
Storage : -20℃ ~ 60℃ ( -4℉ ~ 140℉)
Humidity
Operating : 10% ~ 80%
Storage : 10% ~ 90%
Paper
Paper Type Paper Roll
Paper Width W76mm ± 0.5mm (2.99" ± 0.22")
Roll Diameter
Max. φ83mm
Thickness 0.06mm ~ 0.085mm (0.002" ~ 0.003")
Ribbon
Cartridge
Ribbon Type Cartridge type (GRC-201 B/R)
Color Black / Red
Ribbon Life
Approx Black : 1.5 Million characters
Red : 0.75 Million characters
※ Note
*1) Printing speed may be slower depending on the data transmission speed and the
combination of control commands.
*2) The above values are calculated under printing level 2 with recommended paper at
normal temperature.
The values may vary with environment temperature, printing level, etc.
◈ Serial(RS-232C) Fixed Interface Model Windows Driver Installation
: IFA-S TYPE
1. After running the product installation CD, run the Impact Printer > SRP-270 > Drivers >
Windows Driver > Drivers Folder > Win SRP-270_Vx.x.x.exe file.
2. In the opening installation window, click on Next.
3. In the Ready to Install the Program window, click on Install.
4. In the Select Port Type window, select one Serial Port and click Next.
(Figure 1)
5. In the Question window, select Yes and the computer will reboot.
6. After rebooting, open Start > Settings > Printers & Fax > BIXOLON SRP-270 Icon >
Right-Click > Properties.
7. In the Properties window, select the Port tab and click on the Port Settings. Check to see
that the information is identical to the self-test results after installation.
8. In the Properties window, after selecting the General tab, click on Print Test Page to
confirm that printing is normal.
◈ Parallel(IEEE1284) Fixed Interface Model
Windows Driver Installation
:
IFA-P TYPE
1. After running the product installation CD, run the Impact Printer > SRP-270 > Drivers
> Windows Driver > Drivers Folder > Win SRP-270_Vx.x.x.exe file.
2. In the opening installation window, click on Next.
3. In the Ready to Install the Program window, click on Install.
4. In the Select Port Type window, select one Parallel Port and click Next.
(Refer to Figure 1)
5. In the Question window, select Yes and the computer will reboot.
6. After rebooting, open Start > Settings > Printers & Fax > BIXOLON SRP-270 Icon >
Right-Click > Properties.
7. In the Properties window, after selecting the General tab, click on Print Test Page to
confirm that printing is normal.
◈ USB Fixed Interface Model Windows Driver Installation
: IFA-U TYPE
1. After running the product installation CD, run the Impact Printer > SRP-270 > Drivers >
Windows Driver > Drivers Folder > Win SRP-270_Vx.x.x.exe file.
2. In the opening installation window, click on Next.
3. In the Ready to Install the Program window, click on Install.
4. In the Select OS Type window, click on Next.
5. In the Select Port Type window, select USB and click Next. (Refer to Figure 1)
6-1. If using Windows 98/ME:
① After completing the installation procedures, reboot the computer.
② After rebooting, turn the printer power off and back on.
③ After the New Hardware Detected window appears, continue to click Next to install the
USB drive, and then reboot the computer once more.
6-2. If using Windows 2000:
① After the Information window appears, turn the printer off and back on and click Yes.
② After installation is complete, reboot the computer.
6-3. If using Windows XP:
① After the Information window appears, turn the printer off and back on and click Yes.
② After the New Hardware Detected window appears, continue to click Next to install the
USB drive, and then reboot the computer.
※ Note
When the digital registration message appears during installation, click on either OK or
Continue Anyway.
7. After rebooting, open Start > Settings > Printers & Fax > BIXOLON SRP-270 Icon >
Right-Click > Properties.
8. In the Properties window, after selecting the General tab, click on Print Test Page to
confirm that printing is normal.
◈ Ethernet Fixed Interface Model
Windows Driver Installation
: IFA-E TYPE
Refer to the user manual regarding separate Ethernet interface cards.(Refer to the CD)
◈ WEEE (Waste Electrical and Electric Equipment)
This marking shown on the product or its literature, indicates that is should not be
disposed with other household wastes at the end of its working life, To prevent
possible harm to the environment or human health from uncontrolled waste disposal,
please separate this from other types of wastes and recycle it responsibly to promote
the sustainable reuse of material resources. Household users should contact either the
retailer where they purchased this product, or their local government office, for details
of where and how they can take this item for environmentally safe recycling. Business
users should contact their supplier and check the terms and conditions of the purchase
contract. This product should not be mixed with other commercial wastes for disposal.
☎
BIXOLON Co., Ltd.
● Website http://www.bixolon.com
● Korea Headquarters
(Add) 7~8F, (Sampyeong-dong), 20, Pangyoyeok-ro241beon-gil,
Bundang-gu, Seongnam-si, Gyeonggi-do, 13494, Korea (ROK)
(Tel.) +82-31-218-5500
● U.S. Office
(Add) BIXOLON America Inc., 3171 Fujita St, Torrance, CA 90505
(Tel.) +1-858 764 4580
● Europe Office
(Add) BIXOLON Europe GmbH, Tiefenbroicher Weg 35 40472 Düsseldorf
(Tel.) +49 (0)211 68 78 54 0
To Previous Page
Loading...
Need help?
General
