BIXOLON SRP-270 User Manual

SRP-270
Rev. 2.03
- 44 -
3) If the user wishes to open Cash Drawer 1 prior to printing, enter “\x1B\x70\x00\x19\xff”
in the ”BeginDoc” space and click the “OK” button.
4) If the user wishes to open Cash Drawer 1 at the end of printing, enter
“\x1B\x70\x00\x19\xff” in the ”EndDoc1” space and click the “OK” button.
5) If the user wishes to feed three lines at the end of printing, enter “3” in the ” EndDoc2”
space and click the “OK” button.
For more information on the hexadecimals that can be entered in ”BeginDoc” and ”
EndDoc1”, refer to the Control Commands Manual.

BIXOLON SRP-270 Specifications

General

Color	No
Maximum print size	-
Media thickness	76 mm
Print technology	Dot matrix
Power requirements	120-230VAC
Standard interfaces	Parallel, Serial