BIXOLON SRP-270 User Manual

SRP-270
Rev. 2.03
- 45 -
6. Windows Driver Specifications
6-1 Fonts
The Windows Driver of the printer supports the fonts listed below.
Printing is done at faster speed when using the fonts below as opposed to the Windows
fonts of the OS.
Printer Fonts Character size(dot) Sizes (point)
FontA1x1 FontA1x1[Ext.] FontA1x1[255] FontA1x1(9x9) 9
FontA1x2 FontA1x2[Ext.] FontA1x2[255] FontA1x2(9x18) 18
FontA2x1 FontA2x1[Ext.] FontA2x1[255] FontA2x1(18x9) 9
FontA2x2 FontA2x2[Ext.] FontA2x2[255] FontA2x2(18x18) 18
FontB1x1 FontB1x1[Ext.] FontB1x1[255] FontB1x1(7x9) 9
FontB1x2 FontB1x2[Ext.] FontB1x2[255] FontB1x2(7x18) 18
FontB2x1 FontB2x1[Ext.] FontB2x1[255] FontB2x1(14x9) 9
FontB2x2 FontB2x2[Ext.] FontB2x2[255] FontB2x2(14x18) 18
Printer Fonts are defined as follows.
1) FontA1x2
- ANSI Character code support (Code Page 16: 1252)
- Character size (dot): 9 x 18 (double height)
- Sizes (point): 18
2) FontA1x2[Ext]
- IBM expansion Character code support (Code Page 0: 437)
- Character size (dot): 9 x 18 (double height)
- Sizes (point): 18
3) FontA1x2[255]
- Buyer exclusive code support (Code Page 255)
- Character size (dot): 9 x 18 (double height)
- Sizes (point): 18

BIXOLON SRP-270 Specifications

General

Color	No
Maximum print size	-
Media thickness	76 mm
Print technology	Dot matrix
Power requirements	120-230VAC
Standard interfaces	Parallel, Serial