BIXOLON SRP-330III User Manual

Ver. 1.00
- 5 -
SRP-330III/332III
Compliance information
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) This device may not cause harmful interference, and (2) This device
must accept any interference received, including interference that may cause undesired
operation.
This equipment has been tested and found to comply with the limits for a Class A digital
device pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated in a
commercial environment. This equipment generates uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the instruction manual,
may cause harmful interference to radio communications. Operation of this equipment
in a residential area is likely to cause harmful interference in which case the user will be
required to correct the interference at his own expense.
Caution: Exposure to Radio Frequency Radiation.
To comply with FCC RF exposure compliance requirements, a separation distance of at
least 20 cm must be maintained between the antenna of this device and all persons.
Caution: Any Changes or modifications not expressly approved by the manufacturer could
void the user's authority to operate the equipment.
Class A Digital Device : Wired Device
This Apparatus complies with class “A” limits for radio interference as specified in the
Canadian department of communications radio interference regulations.
This Class A digital apparatus complies with Canadian ICES-003.
Appareil numérique de classe A: appareil filaire
Get appareil est conforme aux normes class “A” d’interference radio tel que specifier par
ministre canadien des communications dans les reglements d’interference radio.
Cet appareil numérique de la classe A est conform à la norme NMB-003 du Canada.

BIXOLON SRP-330III Specifications

General

USB connector	USB Type-B
Serial interface	Yes
Serial interface type	RS-232
USB 2.0 ports quantity	1
Connectivity technology	Wired
AC input voltage	100 - 240 V
Power source type	AC
AC input frequency	50/60 Hz
Wi-Fi	No
Maximum printing width	72 mm
Printing media thickness	0.05 - 0.08 µm
Roll core diameter (max)	80 mm
Cables included	USB
Type	POS printer
Print technology	Direct thermal
Sustainability certificates	ENERGY STAR
Storage temperature (T-T)	-20 - 60 °C
Operating temperature (T-T)	0 - 40 °C
Storage relative humidity (H-H)	10 - 90 %
Operating relative humidity (H-H)	10 - 80 %
Flash memory	64 MB
Storage media	Flash
Internal memory	128 MB
Built-in barcodes	CODABAR (NW-7), Code 128 (A/B/C), Code 39, Code 93, Data Matrix, EAN13, EAN8, ITF, PDF417, QR Code, UPC-A, UPC-E
Built-in sensors details	Paper End, Cover Open
Product color	Black

Weight and Dimensions

Depth	195 mm
Width	145 mm
Height	146 mm
Weight	1600 g