BIXOLON SRP-332II Command Manual

SRP-330II/332II
Rev. 1.00 BIXOLON
- 74 -
cn
fn
Function
48
65
Function 065
PDF417: Specify the number of columns
66
Function 066
PDF417: Specify the number of rows
67
Function 067
PDF417: Specify the width of module
68
Function 068
PDF417: Specify the module height
69
Function 069
PDF417: Specify the error correction level
70
Function 070
PDF417: Specify the option
80
Function 080
PDF417: Store the received data in the symbol storage area
81
Function 081
PDF417: Print the symbol data in the symbol storage area
49
65
Function 165
QR CODE: Select the module
67
Function 167
QR CODE: Select the size of module
69
Function 169
QR CODE: Select the error correction level
80
Function 180
QR CODE: Store the data in the symbol storage area
81
Function 181
QR CODE: Print the data in the symbol storage area
61
67
Function 567
DATAMATRIX: Select the size of module
80
Function 580
DATAMATRIX: Store the symbol data in the symbol storage area
81
Function 581
DATAMATRIX: Print the symbol data in the storage area
Remarks:
PDF417 symbol data (when cn=48)
■ The symbol data is defined, stored to the symbol storage area by Function 080 and printed by the specification of
Function 081. The symbol data in the area remains reserved until the following processes are executed:
• Performing Function 080
• Performing ESC @
• Performing the printer reset and power-off
■ The setting values of Functions 065 to 070 are utilized for the processing of Function 080. The printable area
must be large enough to accommodate different-size symbols. If not, the symbol may not be printed.
■ The same symbol data is repeatedly printed by executing Function 081 after performing Function 080.
■ The same symbol data is printed differently by executing Function 081 after setting the feature of the symbol by using
Functions 065 through 070.

BIXOLON SRP-332II Specifications

General

Brand	BIXOLON
Model	SRP-332II
Category	Printer
Language	English