QRCODE Symbol Data (cn = 49)
■ The symbol data is defined, stored to the symbol storage area by Function 180 and printed by the specification of
Function 181. The symbol data in the area remains reserved until the following processes are executed:
• Performing Function 180
• Performing ESC @
• Performing the printer reset and power-off
■ The setting values of Functions 165 to 169 are utilized for the processing of Function 180. The printable area
must be large enough to accommodate different-size symbols. If not, the symbol may not be printed.
■ The same symbol data is repeatedly printed by executing Function 181 after performing Function 180.
■ The same symbol data is printed differently by executing Function 181 after setting the feature of the symbol by using
Functions 165 through 169.
DATAMATRIX Symbol Data (cn=61)
■ The symbol data is defined, stored to the symbol storage area by Function 580 and printed by the specification of
Function 581. The symbol data in the area remains reserved until the following processes are executed:
• Performing Function 580
• Performing ESC @
• Performing the printer reset and power-off
■ The setting value of Functions 567 is utilized for the processing of Function 581. The printable area must be large
enough to accommodate different-size symbols. If not, the symbol may not be printed.
■ The same symbol data is repeatedly printed by executing Function 581 after performing Function 580.
■ The same symbol data is printed differently by executing Function 581 after setting the mode by using Functions 567.
To Next Page
Loading...
Need help?
General