BIXOLON SRP-350V Command Manual

Thermal POS Printer
Ver. 1.00 BIXOLON
- 89 -
<Function 181> GS ( k pL pH cn fn m (fn=81)
Code:
ASCII
GS
(
k
pL
pH
cn
fn
m
Hex
1D
28
6B
03
00
31
51
m
Decimal
29
40
107
3
0
49
81
m
Range:
(pL + pH x 256) = 3 (pL=3, pH=0)
cn=49
fn=81
m=48
Default:
None
Description:
This command encodes and prints QR Code symbol data saved in the symbol storage area.
Remarks:
■ In standard mode, this command is available only when printer is at the beginning of a line or the printer buffer is
empty.
■ A symbol exceeding the printing area in size can not be printed.
■ Printing operation is not processed under the following conditions:
• There is no data. (Function 180 is not executed)
• If [(number of columns x number of rows) < number of code words], the numbers of columns and rows are
automatically processed.
• The four types of data compression modes are listed below. According to the symbol data in the data storage area,
automatically selects the best suitable compression mode.
*Numeric Data Code
*Alphanumeric Data mode
*Kanji Data mode
*8 bit Data mode

BIXOLON SRP-350V Specifications

General

Brand	BIXOLON
Model	SRP-350V
Category	Printer
Language	English