■ The following data is automatically added by the encoding processing:
• Position sensor pattern
• Segregator for the position sensor pattern
• Timing pattern
• Format information
• Version information
• Error correction code text
• Pad code text
• Indicator for counting bits of bytes
• Mode indicator
• Concluder
• Queue pattern (when model 2 is selected)
• Expansion pattern (when model 1 is selected)
■ Except for character size and upside-down printing mode, none of print mode such as emphasized, double-strike, etc,
affects the printing of the symbol.
■ In standard mode, the paper feed amount set by the paper feed setting command does not affect printing of the
symbol. The printing position returns to the left side of the printable area after printing the symbol.
■ In page mode, the printer stores the symbol data in the print buffer without executing actual printing.
■ The quiet zone is not included in the printing data. Be sure to include the adequate quiet zone for executing of this
command.
To Next Page
Loading...
Need help?
General