■ Introduction to Product
SRP-380/382 series printers have been designed to be connected to various types of
electronic devices such as ECR (Electronic Cash Register), POS (Point Of Sales), and
computer peripheral devices.
Major features of the printer are as follows.
1. Print at a max. speed of 350mm/s.
2. Low noise thermal printing.
3. Support of USB(built-in type), Ethernet, Serial, Dual Serial, Powered USB,
Wireless LAN, and Bluetooth interfaces.
4. Internal data buffer(data can be received and buffered while printing).
5. Control of external devices like cash registers through peripheral device drive circuit.
6. Barcode Printing.
7. Support of various print density settings(by changing DIP switch settings).
It is advisable to read the contents of this manual carefully before using the printer for the
first time.
※ Use only authorized supplies that can be trusted!
- We are not responsible for quality and service for damage caused by the use of
unauthorized products (or recycled ones).
- The following Bluetooth mark and QD ID B021701 is only applicable to models with the
Bluetooth SIG qualification.
We at Bixolon Co., Ltd. constantly strive to improve product functions and quality. To do
this, the specifications of our product and the contents of the manual may change without
prior notice.
To Next Page
Loading...
Need help?
General