BIXOLON SRP-770 - Virtual Driver; Hardware Version and Configuration Tool Mapping; Interface Card Details

Ethernet
V 4.00
- 5 -
3-3. Virtual Driver
- It converts output of Serial (COM) port into output of Ethernet (TCP/IP) port.
- It is available for Windows 2000, XP and 2003 server.
3-4. Hardware version and Configuration Tool
Hardware
version
Interface card Printer
Configuration Tool
file
Network
interface
IFA-E
SRP-270,350
SRP-370,372
SRP-350Plus
IFC-E SRP-275
V4.x.x
ON Board
SRP-770II
SLP-T400
Configure_V4.x
Web Server
IFA-E
SRP-270,350
SRP-370,372
SRP-350Plus
IFC-E SRP-275
V3.x.x
RIF-EN10B
SRP-770
SRP-770II
SLP-T400
Configure _V3.x
10/100 Base-T
All in one
V2.x.x RIF-350E SRP-270,350 Ethernet_V2.0 10 Base-T
V1.x.x RIF-350E SRP-270,350 Ethetnet_V1.3 10 Base-T
[Note]
In case the hardware version is V4.X.X or higher, use Configure_V4.x or Web server.
You can simply use Web Server on Internet Explorer.
3-5. Details of interface card
Item Details
Network interface 10/100 Base-T All in one (Auto detection)
Protocol TCP, UDP, IP, ICMP, ARP
IP mode static IP, DHCP (Dynamic Host Configuration Protocol)
RX buffer 2 KByte
Flow control Hardware (RTS/CTS)
Baud rate (Serial speed) 1200 ~ 230400 bps