Need help?Do you have a question about the BIXOLON XD3-40t Series and is the answer not in the manual?
Important warnings and cautions to prevent harm or damage.
Explains symbols related to DC, Warning, USB, and Ethernet.
Details compliance with FCC Rules, ICES-003, and radio interference regulations.
Guidelines for responsible disposal and recycling of electronic equipment.
Lists separate manuals for drivers, utilities, programming, and design.
Crucial warnings for electrical connections and handling to prevent fire or shock.
Instructions to keep plastic bags out of children's reach.
Steps to take if strange smoke, odor, or noise is observed.
Guidelines on stable placement, using approved accessories, and avoiding water.
Lists all items that should be contained in the printer package.
Identifies exterior parts like buttons, covers, and ports.
Identifies internal parts like the print head, sensors, and media guides.
Install the printer in a location that meets the following conditions.
Connect power to the printer as shown below.
Shielded cables must be used to prevent radiation and reception of electrical noise.
Open the media cover and ribbon assembly then remove the media.
Procedures for installing different types of ribbons and cores.
View current printer status via the printer's LED display.
Use the feed/pause button for media feed, configuration mode, and pause/resume.
Check if the printer has any problems by performing a self-test.
Execute various modes using button and LED status.
Measure exact length of currently installed media.
Pause and resume printing operations.
Calibrate gap sensor for proper media detection.
Calibrate black mark sensor for proper media detection.
Calibrate sensor parameters using the utility program.
Diagnose communication issues by printing received data in hex format.
Automatically separate printed media from liner using a peeler.
Prepare printer and connect external media supplies.
Clean the printer head using alcohol-soaked cloth or swab.
Clean sensors, rollers, and media path with dry cloth or alcohol swab.
Replace roller assembly by pulling roller holders and assembling new one.
Details on printing method, media, ribbon, adapter, and usage conditions.
Lists the types of labels used with this printer.
Important warnings and cautions to prevent harm or damage.
Explains symbols related to DC, Warning, USB, and Ethernet.
Details compliance with FCC Rules, ICES-003, and radio interference regulations.
Guidelines for responsible disposal and recycling of electronic equipment.
Lists separate manuals for drivers, utilities, programming, and design.
Crucial warnings for electrical connections and handling to prevent fire or shock.
Instructions to keep plastic bags out of children's reach.
Steps to take if strange smoke, odor, or noise is observed.
Guidelines on stable placement, using approved accessories, and avoiding water.
Lists all items that should be contained in the printer package.
Identifies exterior parts like buttons, covers, and ports.
Identifies internal parts like the print head, sensors, and media guides.
Install the printer in a location that meets the following conditions.
Connect power to the printer as shown below.
Shielded cables must be used to prevent radiation and reception of electrical noise.
Open the media cover and ribbon assembly then remove the media.
Procedures for installing different types of ribbons and cores.
View current printer status via the printer's LED display.
Use the feed/pause button for media feed, configuration mode, and pause/resume.
Check if the printer has any problems by performing a self-test.
Execute various modes using button and LED status.
Measure exact length of currently installed media.
Pause and resume printing operations.
Calibrate gap sensor for proper media detection.
Calibrate black mark sensor for proper media detection.
Calibrate sensor parameters using the utility program.
Diagnose communication issues by printing received data in hex format.
Automatically separate printed media from liner using a peeler.
Prepare printer and connect external media supplies.
Clean the printer head using alcohol-soaked cloth or swab.
Clean sensors, rollers, and media path with dry cloth or alcohol swab.
Replace roller assembly by pulling roller holders and assembling new one.
Details on printing method, media, ribbon, adapter, and usage conditions.
Lists the types of labels used with this printer.
General| Brand | BIXOLON |
|---|---|
| Model | XD3-40t Series |
| Category | Label Maker |
| Language | English |
To Next Page
