BIXOLON XT Series - User Manual

Network Connection Manual
XT Series
Industrial Label Printer
Ver. 2.01
http://www.bixolon.com

Summary

1. Introduction

2. Precaution

3. How to Connect

3-1 Connecting Printer

Details the physical connection methods for USB, Ethernet, and WLAN setup.

3-2 Check Network Setting

3-3 Initial Wireless LAN Connection (Windows 10)

4. Configuration

4-1 LAN Setting Values

Details configurable parameters for LAN settings like printer name, port, user, and network details.

4-2 WLAN Setting Values

Lists and describes parameters for WLAN configuration, including SSID, security, and IP settings.

4-3 LCD Display

4-3-1 Ethernet Configuration

Details the steps for configuring Ethernet settings via the printer's LCD.

4-3-2 WLAN Configuration

Details the steps for configuring WLAN settings via the printer's LCD.

4-4 Configuration Tool

4-4-1 Ethernet Configuration

Explains how to configure Ethernet settings using the Net Configuration Tool.

4-4-2 WLAN Configuration (After initial Wireless LAN Connection)

Details configuring WLAN settings using the Net Configuration Tool after initial connection.

4-4-3 WLAN Configuration (USB Cable)

Guides on configuring WLAN settings using the Net Configuration Tool via USB cable.

4-5 Web Browser

4-5-1 Ethernet Configuration Selection

Explains how to configure Ethernet settings through the printer's web browser interface.

4-5-2 Wireless LAN Selection

Explains how to configure WLAN settings through the printer's web browser interface.

4-6 FTP

4-7 Telnet

4-8 SMTP

5. Ethernet; WLAN Test by using Windows Test Page

6. Troubleshooting

When using Ethernet

Lists checks for IP address, subnet mask, and port when using Ethernet.

When using WLAN

Lists checks for wireless network settings, SSID, 802.11 mode, and IP address.

Checking IP collision

Explains how to check for IP address conflicts using ARP and Ping commands.

Ping TEST

Provides steps to perform a Ping test to verify network connectivity.

Check Cable

Suggests checking the Ethernet cable by connecting it to other devices.

BIXOLON XT Series Specifications

General

Print Method	Direct Thermal / Thermal Transfer
Print Resolution	203 dpi
Max. Print Length	1, 000 mm
Optional Interfaces	Ethernet
Media Thickness	0.06 ~ 0.20 mm
Ribbon Width	33 mm ~ 110 mm
Ribbon Length	Up to 300 m
Supported OS	Windows, Linux