BIXOLON XT Series - 1. Introduction; 2. Precaution

Network Connection Manual
Ver.2.01
- 3 -
1. Introduction
This Network manual provides information on the connection of network with the Industrial
Label printer. We at BIXOLON maintain ongoing efforts to enhance and upgrade the
functions and quality of all our products. In following, product specifications and/or user
manual content may be changed without prior notice.
2. Precaution
1) The printer has to be within 100m(Outdoor) from AP(Access point) to connect WLAN.
Although 35m is able to communicate in door, WLAN could be affected by environment
to be shorten. The wireless LAN signal strength can be checked by LCD Display.
Icon
Status
Description
ON
Disconnected to the AP(Access Point)
OFF
No WLAN Interface
ON
Connect to an AP. Signal strength : 4
ON
Connect to an AP. Signal strength : 3
ON
Connect to an AP. Signal strength : 2
ON
Connect to an AP. Signal strength : 1
2) The maximum separating distance may be shortened if transmission obstacles, such as
cement walls, are present
3) If a device (such as a microwave oven, wireless LAN, etc.) that uses the same
frequency is present, transmission may be interrupted. Separate the printer and
Bluetooth-enabled device from such interrupting devices by a distance of at least 5m.