Instruction manual A400 / A400FB About this machine
6.054.98.5.10.06 en 2 - 1
2
2 About this machine
2.1 Intended use
This Bizerba slicer is technical work equipment intended for commercial use only.
It may only be operated by instructed personnel over the age of 14.
The A400 / A400FB is a slicer that automatically feeds, slices and delivers according to the
respective program that is set.
Several sliced product pieces can be placed next to each other. Insertion width max. 240
mm (= 9.45").
Approved sliced products, taking sizes into consideration
– All kinds of cold cuts, deli meat
– Ham, bacon
– Smoked ham with / without rind
– Roast meats, roast beef
– Meat, roulades
– Sliceable cheese
– Bread
Note: If cheese is the main product being sliced, we recommend using a special cheese
blade.
Slicing of other materials requires prior written approval by Bizerba product management.
The following may not be sliced due to risk of injury and damage:
– NON-FOOD articles
– Bone-in products
– Frozen products
Product sizes
Min. 50 x 50 mm = 2" x 2" (W x H) or 50 mm = 2" diameter
Min. 240 x 175 mm = 9.5" x 6.9" (W x H) or 180 mm = 7.1" diameter
Applications
The slicer is intended for installation in the sales area. Installation is permitted in the prep-
aration room.
Permissible ambient temperatures from -10°C to 40°C (+14 to +104 degF).
Operating time
Designed for permanent operation (2 shift operations at 16/day)
To Next Page
Loading...
Need help?
General
