Bizerba GLP-58 - User Manual

GLP printer driver
Operating instructions
from program version 4.00
6.562.98.5.01.01 en

Bizerba GLP-58 Specifications

General

Brand	Bizerba
Model	GLP-58
Category	Printer
Language	English

Summary

Device Description and Operation

GLP-58 Printer Features

GLP-80;160 Printer Features

Software and System Requirements

Required Hardware Specifications

Lists minimum hardware requirements, including CPU, RAM, and free hard disk space for installation.

Supported Software Environments

Installation and Setup Procedures

Pre-Installation Checks and Requirements

Step 1: Install Drivers and Software

Details the process of launching SETUP.EXE, accepting license terms, and proceeding with installation.

Step 2: USB Driver Installation

Covers the installation of the USB driver, including automatic detection and manual adjustment procedures.

Automatic USB Driver Installation Process

Guides connecting the printer via USB for Windows to automatically identify and install the 'Bizerba Gx USB' driver.

Manual USB Driver Adjustment Procedure

Explains correcting USB device assignments in Device Manager if the automatic driver installation fails.

Step 3: Configure Printer in Operating System

Details accessing the Control Panel to set up and configure the GLP printer within the OS.

Step 4: Verify Installation with Test Print

Describes performing a test print via printer properties or an application to confirm functionality.

Upgrade Existing GLP Driver (32-Bit)

Upgrade Procedure: Initial Step

Upgrade Procedure: Post-Upgrade Steps

GLP 80;160 Configuration Tool

Uninstalling the Printer Driver

Provides a step-by-step guide for removing the GLP printer driver and associated printers.