Need help?Do you have a question about the Bizerba GLP Series and is the answer not in the manual?
General| Max. Print Width | 104 mm |
|---|---|
| Power Supply | 100-240 V AC, 50/60 Hz |
| Print Method | Thermal Direct / Thermal Transfer |
| Print Resolution | 8 dots/mm (203 dpi) |
| Interfaces | USB, Ethernet |
| Media Type | Labels |
Ensures operating instructions are kept with the device and accessible to everyone.
Specifies that the device must be operated by trained personnel familiar with these instructions.
Explains the meaning of symbols used in the operating instructions for clarity.
Details the GLP 58 printer's design and three operating modes: Epson, pixel, and industry.
Describes the GLP 80/160 printer and its operation without a display unit, including key functions and mode combinations.
States the GLP printer driver is for GLP 80/160 or 58 printers under Windows for printing from Windows programs.
Outlines Bizerba's rights regarding documentation and software, including licensing and usage terms.
Details warranty exclusions, including non-compliance, faulty installation, and unauthorized modifications.
Recommends checking the PC for viruses regularly and after installing new software.
Lists the minimum hardware specifications for the GLP printer driver: Pentium II, 512 MB RAM, 100 MB HDD.
Specifies supported Windows operating systems from 2000 to 2008 R2, including terminal server support.
Ensures computer meets requirements, closes programs, and notes administrative rights are needed for installation.
Guides through running SETUP.EXE, accepting license agreements, and navigating the installation wizard.
Details the process of installing the USB driver, including automatic installation steps.
Explains how to connect the printer via USB and let Windows automatically identify and install the driver.
Describes how to manually correct USB device assignment if the printer is identified incorrectly.
Guides users to set up the printer via the control panel's 'Printers and fax devices' or 'Hardware and Sound' section.
Explains how to perform a test printout using printer properties or an application, and adjust page margins.
Provides instructions for upgrading an existing GLP printer driver installation to a new version without uninstalling the old one.
Details starting the InstallShield Wizard to upgrade the BIZERBA GLP Druckertreiber to a new version.
Explains how to set replaced printers to 'on-line' by checking printer settings after driver replacement.
Introduces utility programs and tools available for the GLP printer driver.
Describes the configuration program for the GLP 80/160 connected via serial interface, including connection and parameter settings.
Explains how to adapt log paths for Bizerba programs and restart the printer queue.
Details Profibus support availability for specific Windows versions and notes configuration is device-specific.
Explains the installation of RocketPort drivers for multi-serial interface cards if selected during setup.
Provides step-by-step instructions for uninstalling the GLP printer driver and associated software.
To Next Page
