Bizerba GLPmaxx 80 - User Manual

GLP printer driver
Operating instructions
from program version 4.00
6.562.98.5.01.01 en

Bizerba GLPmaxx 80 Specifications

General

Print Technology	Thermal transfer/direct thermal
Media Width	Up to 80 mm
Connectivity	Ethernet, USB, RS232
Label Width	25.4 mm - 80 mm
Power Supply	100 - 240 V AC, 50/60 Hz
Print Resolution	203 dpi (8 dots/mm) or 300 dpi (12 dots/mm)
Max. Print Width	72 mm

Summary

GLP-58 Printer Details

GLP-58 Printer Operating Modes

Details GLP-58 operating modes (Epson, pixel, industry) and interface switching.

GLP-58 Control Panel Elements

Installation - Preparation

Before Installation Checks

Step 1: Install Drivers and Programs

Details starting SETUP.EXE, handling user account control, and navigating the wizard.

Installation - Driver and USB Setup

Step 2: USB Driver Installation

Explains the process of installing the USB driver for connection.

Automatic USB Driver Installation

Installation - Printer Configuration

Manual USB Driver Adjustment

Step 3: Set up Printer

Guide to accessing printer settings via Control Panel and configuring the Bizerba GLP printer.

Installation - Printer Management

Adding a New Printer

Installation - Testing

Step 4: Test Printout

Describes test printing via properties or application, and adjusting page setup.

Installation - Upgrade Process

Upgrade Previous Installation (32-Bit)

Instructions for upgrading an existing GLP printer driver without uninstalling.

Step 1: Upgrade Process

Installation - Utilities and Tools

GLP 80;160 Configuration Program

Guide to using the configuration program for GLP 80/160 via serial interface.

Installation - Ancillary Features and Uninstall

Uninstalling the GLP Printer Driver

Steps to uninstall driver, including deleting printers and stopping the print system.

Installation - USB Driver Uninstall

Uninstall USB Driver

Instructions for uninstalling the Bizerba USB driver via Device Manager.