Maintenance Instruction manual GSP
56 / 92 38107010002 en-US
8 Maintenance
8.1 Preparation for cleaning
Clean thoroughly:
– before putting into operation
– depending on use and application frequency
– depending on the product
– depending on the ambient temperature
– if extremely soiled, several times a day
– after sharpening
– after a longer down time
WARNING
Unprotected blade!
Coming in contact with the sharp blade can lead to serious injuries.
– Always wear cut-proof gloves when cleaning.
– Do not clean the surfaces of the blade when operating the machine!
GSP HD, GSP HD W:
Switch off machine.
Remove the AC power plug.
Set slice thickness below "0" (black
marking).
Fig.71: Slice thickness below "0"
To Next Page
