Need help?Do you have a question about the BK Medical bkSpecto 1300 and is the answer not in the manual?
General| Brand | BK Medical |
|---|---|
| Model | bkSpecto 1300 |
| Category | Medical Equipment |
| Language | English |
Details the safety standards and compliance the bkSpecto system adheres to, including IEC and CSA standards.
Provides critical safety warnings and cautions for operating and servicing the bkSpecto system to prevent injury.
Lists detailed exploded views and part numbers for the engine components of the bkSpecto system.
Lists recommended special tools and equipment required for checking procedures and safety tests.
Explains how edition numbers are updated for revised service manuals and where to find revision information.
Details the mandatory checks and visual inspections required after performing repairs on the scanner.
Lists essential equipment like transducers and phantoms needed for system checks and performance tests.
Offers quick troubleshooting answers for common issues like transducer or scanner problems and image noise.
Compares the differences between Console and Service modes and explains how to enter Service mode.
Provides guidance on replacing spare parts and outlines the required follow-up tasks after part replacement.
Details the scanner's disk structure, partitions, and service-relevant files and directories on the C drive.
Explains how to adjust the touchscreen brightness, noting it's a user preference setting saved automatically.
Details how to adjust the display brightness, which is also a user preference setting saved upon leaving the dialog.
Provides a table detailing all screws used in disassembly, including part number, size, and usage.
Describes the engine assembly, its division by mounting plate, and lists spare parts available for it.
Details the procedure for removing the monitor assembly, including cover plugs, screws, and EMI gasket.
Lists equipment needed for PM visits, including parts, tools, and safety testers, categorized for clarity.
Outlines the steps for performing preventative maintenance, referencing specific sections for detailed procedures.
Ensures system compliance with safety standards by completing the Electrical Safety Test using specific documents.
Provides an overview of the system's main blocks and their interactions, supported by a block diagram.
Describes key boards like the Glass UI Control Panel and its components, including LCD and touch overlay.
Details the USB 3.0 Type A sockets, their bandwidth, and locations on the engine and control panel.
Describes the RJ45 LAN socket, its speed, and its location on the left side of the engine.
To Next Page
