Need help?Do you have a question about the BK Medical E14C4t and is the answer not in the manual?
General| Brand | BK Medical |
|---|---|
| Model | E14C4t |
| Category | Medical Equipment |
| Language | English |
The transducer is intended for diagnostic ultrasound imaging or fluid flow analysis of the human body.
E14C4t combines simultaneous biplane imaging and endfire imaging for transrectal and transvaginal procedures.
The patient population is adults.
Describes the two curved arrays for transverse, sagittal, and endfire imaging planes of the E14C4t transducer.
Guidelines for checking the transducer for damage before use and monthly.
Procedures for cleaning and reprocessing the transducer to ensure best results.
Enables selection of imaging frequency using the Multi-Frequency Imaging (MFI) facility.
Recommendations for using sterile transducer covers to reduce cross-contamination.
How to change the orientation of the image on the monitor.
Describes transmitting transverse and sagittal images simultaneously.
How to toggle simultaneous live transmission and select active/frozen planes.
How to perform endfire imaging and display endfire and transverse/sagittal images.
Using the dummy bracket UA1325-w for smooth surface and patient comfort.
Adjusting image area width using the Width key on the system's control panel.
Describes three ways to perform transrectal puncture and biopsy with E14C4t.
Details on dummy channel bracket UA1325-w and reusable biopsy guides UA1326, UA1327, UA1328.
Biopsy guides UA1322-S, UA1322-S14, UA1326 used for simultaneous biplane imaging.
Biopsy guides UA1323-S and UA1327 used for endfire imaging.
Biopsy guides UA1329-S and UA1328 used for dual imaging.
Procedure for mounting the UA1324 puncture attachment onto the transducer.
How to superimpose a puncture line on the image for guidance during procedures.
Details on performing 3D imaging with the E14C4t transducer.
Guidelines for the proper disposal and recycling of the transducer and related items.
To Next Page
