BK Radio KNG2-P150 - User Manual

Contents
Introduction.....................................................................................1
FCC Requirements .........................................................................1
Industry Canada Compliance........................................................2
Safety Precautions .........................................................................4
Information and Options ...............................................................7
Battery Installation and Removal .................................................8
Battery Care and Maintenance ....................................................9
Antenna Installation and Removal ...............................................9
Radio Controls ..............................................................................10
LCD Display ...................................................................................11
Status Indicators ..........................................................................11
Alphanumeric Label Options ........................................................12
Programmable Switch and Button Functions ...........................13
Options and Labels .......................................................................14
Channel/Zone Selection Options ................................................17
Channel/Zone Selector Knob ........................................................17
Button/Menu Item Selection ..........................................................17
Direct Keypad Entry ......................................................................17
Using Knob and Button Operations Together ...............................18
Basic Radio Operation .................................................................18
Command Zone Operation ..........................................................19
Building a Command Zone [CHAN+] ............................................19
Editing a Command Zone [CHAN-] ...............................................19
Code Guard/NAC Operation ........................................................20
Code Guard Receive.....................................................................20
Code Guard Transmit ....................................................................20

Summary

Introduction to the KNG2 Portable Radio

FCC Requirements for Radio Operation

Industry Canada Compliance for Radio

Safety Precautions for Radio Use

Information and Options Overview

Radio Options and Features

Battery Installation and Removal Procedures

Installing the Battery

Turn the radio off, align battery tabs with radio slots, and push the battery top until the release tab clicks into place.

Removing the Battery

Slide the release tab toward the bottom, pull the top of the battery out approximately 30 degrees, and pull up to remove the battery pack.

Battery Care and Maintenance Guidelines

Antenna Installation and Removal

Installing the Antenna

Insert the radio's antenna connector into the threaded connector and turn clockwise until firmly seated.

Removing the Antenna

Hold the antenna base and turn it counterclockwise until released.

Radio Controls and Components

LCD Display and Indicators

Status Indicators

Table lists icons for signal strength, encryption, battery, scanning, channel selection, and monitor mode.

Alphanumeric Label Options

Table lists display options for channel labels, numbers, date/time, frequency, MDC, radio name, and talkgroup IDs.

Programmable Switch and Button Functions

Button Options and Labels

Diagram shows programmable buttons and their functions, noting active functions are highlighted.

Keypad Menu Operation Guide

BK Radio KNG2-P150 Specifications