BKI FKM-F User Manual (English)

Other manuals for BKI FKM-F

Questions and Answers:

Linda McdowellAug 8, 2025

What to do if my BKI Fryer has pressure loss or is not releasing pressure?

Y
yshafferAug 8, 2025
If your BKI Fryer is experiencing pressure loss or not releasing pressure, the dead weight valve might be leaking. Try cleaning the weight and orifice. If the problem persists, or if you suspect a leaking lid gasket, a leaking or stuck solenoid valve, or a safety valve not seating properly, contact an authorized BKI service agent for corrective action. To check the solenoid valve, activate the valve by starting a cook cycle; you should hear a solid metallic CLICK sound. If you hear no sound or a slow BUZZING CLICK, this indicates a problem.

Samantha FergusonAug 15, 2025

Why is my BKI Fryer shortening heating too slowly?

A
Amy YoungAug 15, 2025
If the shortening in your BKI Fryer is heating too slowly, several factors could be responsible. It might be due to breading buildup on the heating elements, which requires cleaning. If cleaning doesn't resolve the issue, or if you suspect low or improper voltage, a bad thermostat, loose wires, weak heating elements, or a bad coil on the contactor, it is best to contact an authorized BKI service agent for corrective action.

Brand

Model

FKM-F