EasyManua.ls Logo

BKI LGF - User Manual

Default Icon
56 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Gas Pressure Fryer
MODELS LGF, LGF-F, & LGF-FC
Installation and Operation Manual
Serial Numbers 109576 and higher

Table of Contents

Other manuals for BKI LGF

Preview: Service Manual
Service Manual60 pages

Questions and Answers

  • W
    William MathisJul 29, 2025
    What to do if BKI LGF has pressure loss or is not releasing pressure?
    • B
      Brooke MurphyJul 30, 2025
      If your BKI fryer is experiencing pressure loss or not releasing pressure, it could be due to a leaking dead weight valve (clean the weight and orifice), a leaking lid gasket, a leaking or stuck solenoid valve (listen for a solid metallic CLICK sound when activating; if you hear no sound or a slow buzzing, there may be an issue), or a safety valve that isn't seating properly. For issues beyond cleaning the weight and orifice, contact an authorized BKI service agent for corrective action.
  • R
    rileyemmaAug 2, 2025
    Why is my BKI LGF Fryer losing pressure or not releasing pressure?
    • M
      megan55Aug 2, 2025
      If your BKI Fryer is experiencing pressure loss, or is not releasing pressure, the dead weight valve may be leaking. Try cleaning the weight and orifice. If the lid gasket is leaking, the solenoid valve is leaking or stuck, or the safety valve is not seating, contact an authorized BKI service agent for corrective action. If problems persist, contact an authorized BKI service agent for corrective action.
  • T
    Tara AlvarezAug 7, 2025
    What to do if the filter system is not working on BKI LGF?
    • W
      Wesley MathisAug 7, 2025
      If the filter system on your BKI fryer isn't working, first try pressing the reset button on the end of the pump and the hi-limit reset button under the control panel. Other potential issues include loose connections (tighten them), a filter valve that isn't open, filter paper clogged with crumbs (change the paper), a clogged pump (check it), or a worn motor and pump coupling. Also, ensure the drain valve is completely closed and that there is power to the control panel. If these steps don't resolve the issue, contact an authorized BKI service agent.
  • L
    Lisa PayneAug 11, 2025
    Why is the shortening heating too slowly in my BKI Fryer?
    • T
      thomasvaughnAug 11, 2025
      If your BKI fryer is heating shortening too slowly, this may be due to low or improperly adjusted gas pressure, or a bad thermostat or loose wires. Contact an authorized BKI service agent for corrective action.
  • R
    Ryan YoungAug 15, 2025
    How to fix a computer hang on a BKI LGF Fryer?
    • J
      Jason StephensAug 15, 2025
      If the computer on your BKI fryer hangs, press and hold the Toggle/Clear button while moving the FRY/OFF/FILTER switch from FRY to OFF and back to FRY. If the problem continues, contact an authorized BKI service agent.
  • J
    Jonathan HowardAug 19, 2025
    What to do if the filter system is not working on my BKI LGF Fryer?
    • J
      Jacob KhanAug 19, 2025
      If your BKI Fryer's filter system isn't working, try the following: * Press the reset button on the end of the pump and the hi-limit reset button under the control panel. * Ensure all connections are tight. * Change the filter paper if it's clogged with crumbs. * Make sure the drain valve is completely closed. If the motor hums but doesn't pump, check for a clogged pump. Note that the filter valve must be open. For motor and pump coupling worn you should contact an authorized BKI service agent for corrective action. If problems persist after these steps, contact an authorized BKI service agent for corrective action.
  • H
    harveychristopherAug 25, 2025
    What to do if the computer hangs on my BKI LGF?
    • H
      huntadamAug 25, 2025
      If the computer on your BKI Fryer hangs, press and hold the Toggle/Clear button while moving the FRY/OFF/FILTER switch from FRY to OFF and back to FRY. If problems persist, contact an authorized BKI service agent for corrective action.

Summary

Warranty Information

Limited One Year Warranty

Details the manufacturer's warranty for defects in materials and workmanship for one year.

Limited Ninety Day Labor Warranty

Covers labor for repairs or replacements of factory defective parts within the first ninety days.

Introduction

Safety

Emphasizes following recommended safety precautions and introduces the safety alert symbol.

Safety Signs and Messages

Explains the meaning of DANGER, WARNING, CAUTION, and NOTICE messages.

Safe Work Practices

Outlines essential safety guidelines for operating the fryer, covering fire prevention, electrical safety, and proper usage.

Safety Labels

Details the importance of maintaining safety labels and where to obtain replacements.

Operation

Controls and Indicators

Identifies and explains the various controls and indicators on the fryer.

Care of the Shortening

Provides recommendations for maintaining shortening quality and extending its life.

LGF and LGF-F Operation

Details the operation procedures specific to the LGF and LGF-F models.

LGF-FC Operation

Details the operation procedures specific to the LGF-FC model.

Product Programming

Instructions for setting up to eight product programs for cooking specific items.

Recipes

Provides cooking instructions and times for various food items.

Operation After Gas or Power Outage

Procedure to follow if the fryer shuts off due to gas or power interruption.

Normal Shutoff

Steps for safely shutting down the fryer after use.

Installation

Inspection for Shipping Damage

Guidance on inspecting the unit for damage upon arrival and filing claims.

Preparation

Key considerations and requirements before installing the fryer.

Location and Clearance

Recommendations for selecting a safe and proper location for the fryer, including ventilation and clearances.

Installation Procedure

Step-by-step instructions for the physical installation of the fryer by an authorized agent.

Initial Test and Adjustment

Procedures for initial testing, leak checks, and adjustments after installation.

Gas Conversion Instructions

Information on how to convert the gas system between Natural Gas and LP Gas.

Maintenance

Scheduled Maintenance

Table outlining routine maintenance tasks, frequency, and responsibilities.

Safety Pop Valve Procedure

Instructions for periodically testing the safety pop valve.

Filtering Procedure

Detailed steps for filtering shortening to maintain quality and extend its lifespan.

Boil-Out Procedure

Procedure for cleaning the fryer pot to remove carbon buildup and prevent off-flavors.

Filter Pad Replacement

Instructions for replacing the filter pad, emphasizing proper closure.

Troubleshooting

Appendix A

Gas Control Valve Instructions

Provides detailed instructions for the gas control valve system, referencing Honeywell SmartValve controls.

Honeywell SmartValve System Controls Application

Describes the SmartValve System Controls and their suitability for various gas-fired appliances.

Honeywell SmartValve System Controls Specifications

Details technical specifications including ignition sequences, capacity, and electrical ratings.

Honeywell Installation Planning and Procedures

Guidelines for planning installation, maintenance, and procedures for Honeywell SmartValve controls.

Honeywell Ignition System Control Conversion

Instructions for converting Honeywell ignition system controls between natural gas and LP gas.

Honeywell Control Wiring and Startup

Details on wiring and startup procedures for Honeywell SmartValve ignition system controls.

Honeywell Control Troubleshooting and Maintenance

Covers maintenance, service, sequence of operation, and troubleshooting for Honeywell SmartValve controls.

Honeywell Instructions to the Homeowner

Safety warnings and operating instructions for the homeowner regarding Honeywell SmartValve controls.

BKI LGF Specifications

General IconGeneral
BrandBKI
ModelLGF
CategoryFryer
LanguageEnglish

Related product manuals