Gas Pressure Fryer Installation
27
4. Place the gas control ON/OFF switch in the OFF position.
5. Place the FILTER/OFF/FRY switch in the OFF position.
6. Before you turn on the gas, wait at least five minutes to allow any gas that may have accumulated in the
burner compartment to escape.
7. Place the gas control ON/OFF switch in the ON position.
8. Place the FILTER/OFF/FRY switch to the FRY position. The shortening should begin to heat and begin to
reach the fill mark inside the pot. Add more shortening as required to reach the fill mark.
Gas Conversion Instructions
To convert the gas system from a Natural Gas to LP Gas application or vice versa, contact the BKI Technical
Service Department, toll free: 1-800-927-6887. Outside the U.S., call 1-864-963-3471.
To Next Page
Loading...
