Page 19
Figure 12
Figure 13
CONTINUOUS DRAINAGE (FIG. 12 AND FIG. 13)
When operating in HEAT mode, continuous drain method can also be used to
avoid the trouble of manual drainage.
• Empty the water tank completely.
• Connect one end of the drain hose on the drain outlet and lead the other end to
a permanent drain.
• Turn on the appliance and select HEAT mode.
When continuous drainage method adopted in HEAT mode the water removed
from the air ows out through the drain hose continuously.
Note: Please be sure that the height of an section of the drain hose should not be
higher than that of the drain outlet or the water tank may not be drained.
SET UP & USE
To Next Page
Loading...
Need help?
General
