Why is my Black & Decker CAFÉ SELECT CM6000B Coffee Maker brewing so slowly?
If your Black & Decker coffee maker is brewing more slowly than usual, it might need cleaning. Follow the instructions in the De-scaling With Auto Clean™ section.
What to do if my Black & Decker CAFÉ SELECT CM6000B Coffee Maker brew basket overflows?
If the brew basket of your Black & Decker coffee maker overflows, it could be due to using an excessive amount of ground coffee. Reduce the amount of coffee used to eliminate brew basket overflows. It may also mean that the coffeemaker needs cleaning. Follow the instructions in the De-scaling With Auto Clean™ section.
Why are all the selection lights blinking on my Black & Decker CAFÉ SELECT CM6000B Coffee Maker?
If all eight selection lights are blinking on your Black & Decker coffee maker and the unit will not brew, the water reservoir may not be securely placed onto the unit. Remove and securely replace the water reservoir.
Why are the Robusto and 20oz lights blinking on my Black & Decker CAFÉ SELECT CM6000B?
If the Robusto and 20oz selection lights blink before starting to brew on your Black & Decker Café Select™, it is time to Auto Clean™ your Café Select™. Follow the instructions in the De-scaling with the Auto Clean™ System section.
Why are the six single-serve lights blinking on my Black & Decker Coffee Maker?
If the six single-serve selection lights blink before brewing begins on your Black & Decker coffee maker, there is less than 20 oz. of water in the water reservoir. Add additional water, or ensure that the volume of ground coffee has been adjusted.
Why are the 6 oz and 12 oz lights blinking on my Black & Decker CAFÉ SELECT CM6000B?
If the 6 oz. and 12 oz. selection lights are blinking on your Black & Decker coffee maker, the single serve filter basket lid is not tightly closed. Open and securely reclose the single serve filter basket lid.
Why is my Black & Decker CAFÉ SELECT CM6000B not turning on?
Your Black & Decker coffee maker might not be turning on because it is unplugged. Make sure the appliance is plugged into a working outlet. If it's plugged in but still not on, press the power button to turn the unit on.
What to do if Black & Decker CAFÉ SELECT CM6000B is leaking?
If your Black & Decker coffee maker is leaking, several factors could be the cause. Ensure the water reservoir is not filled beyond the MAX line. Also, make sure the carafe lid is placed straight onto the carafe and that the carafe is securely and squarely placed on the carafe plate. If you are using a travel mug, ensure the lid is removed before brewing.
What to do if my Black & Decker CAFÉ SELECT CM6000B Coffee Maker is leaking coffee onto the base?
If coffee leaks onto the base of your Black & Decker coffee maker, it could be due to a couple of reasons. One possibility is that the carafe was removed for longer than 20 seconds during a brew cycle; make sure to replace the carafe within 20 seconds during the brewing cycle. Another reason may be that the coffee cup or mug was removed before brewing was complete; wait until brew is complete and dripping stops before removing your mug.
Why is my Black & Decker CAFÉ SELECT CM6000B Coffee Maker brewing a partial carafe?
If your Black & Decker coffee maker is brewing a partial carafe of coffee, the water reservoir was not filled to the MAX line when the brew cycle started. Ensure the water reservoir is filled to the MAX line prior to brewing a full carafe.
General| Brand | Black & Decker |
|---|---|
| Model | CAFÉ SELECT CM6000B |
| Category | Coffee Maker |
| Language | English |
To Next Page