(Original instructions)
Black & Decker provides a facility for the collection and
recycling of Black & Decker products once they have reached
the end of their working life. To take advantage of this service
please return your product to any authorised repair agent who
will collect them on our behalf.
You can check the location of your nearest authorised repair
agent by contacting your local Black & Decker ofce at
the address indicated in this manual. Alternatively, a list of
authorised Black & Decker repair agents and full details of our
after-sales service and contacts are available on the Internet
at: www.2helpU.com
Batteries
Z
At the end of their useful life, discard batteries with
due care for our environment:
u Run the battery down completely, then remove it from the
tool.
u NiCd, NiMH and Li-Ion batteries are recyclable. Place
the battery(s) in a suitable packaging to ensure that the
terminals cannot be short-circuited. Take them to any
authorised repair agent or a local recycling station.
u Do not short-circuit the battery terminals.
u Do not dispose of the battery(s) in a re as this may result
in a risk of personal injury or an Explosion.
Technical data
CLM3820
H 1
Input Voltage
V
DC
36
No-Load Speed
min
-1
3500
Weight
kg
16.2
Battery BL2036
Voltage
V
DC
36
Capacity Ah 2
Type
Li-Ion
Charger LCS36 typ. 1
Input Voltage
V
AC
230
Output Voltage
V
DC
36
Current mA 1300
Approx. charge
time
h 1.5-2.0
Hand/arm weighted vibration value:
= < 2.5 m/s
2
, uncertainty (K) = 1.5 m/s
2
.
L
PA
(sound preasure) 80 dB(A)
uncertainty (K) = 3 dB(A)
Area of cut:
u This mower can cut up to 300m
2
on a single 2Ah battery
pack.
u This area (300m
2
) is achieved on a single, fully charged,
2Ah battery pack in dry conditions with the height adjust-
ment lever in position 6 following light growth conditions.
u In damp conditions, lower height settings or heavy growth
conditions the area of cut may be less than 300m
2
.
EC declaration of conformity
MACHINERY DIRECTIVE
OUTDOOR NOISE DIRECTIVE
%
CLM3820
Black & Decker declares that these products described under
"technical data" are in compliance with:
2006/42/EC, EN 60335-1, EN 60335-2-77
2000/14/EC, Lawn Mower, L < 50cm, Annex VI,
TÜV SÜD Product Service GmbH, Ridlstraße 65,
80339 München, Germany
Notied Body ID No.: 0123
Level of accoustic power according to 2000/14/EC (Article 12,
Annex III, L ≤ 50 cm):
L
WA
(measured sound power) 93 dB(A)
uncertainty (K) = 3 dB(A)
L
WA
(guaranteed sound power) 96 dB(A)
These products also comply with directive 2004/108/EC and
2011/65/EU. For more information, please contact Black &
Decker at the following address or refer to the back of the
manual.
The undersigned is responsible for compilation of the technical
le and makes this declaration on behalf of Black & Decker.
_
Kevin Hewitt
Vice-President Global Engineering
Black & Decker Europe, 210 Bath Road, Slough,
Berkshire, SL1 3YD
United Kingdom
03/01/2014
To Next Page
Loading...
Need help?
General
